MSF stuck flipper

[Pharo]

Hi
Wondering if anyone can help with this wee problem Just got this machine and I have noticed that when I get the 6 multiball after about a minute of playing the top right flipper stays up and can't be used only comes down when the last ball drains then works fine again haven't noticed it happening on any other multiball just the 6, flipper works fine any other time.

Thanks in advance

Cheers Brian

 

[Moonraker]

The culprit is likely to be the flipper driver board in the base of the cabinet on the left hand side half way down. You could try cleaning and re-seating connectors first but I suspect the issue may be on the board itself or one of the control lines to it from the MPU in the back box.

 

[Pharo]

Thanks will try a wee clean and reseat the connectors,is a flipper board easy to get hold of for the machine I gather a data east will fit.

Cheers Brian.

 

[PinballDaze]

520-5076-00.

DE part number.

I have one left in stock.

Dave
www.pinballdaze.co.uk