Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Complete Monster Bash #2 - Cab and Back Box Refurb
- Thread starter Joules
- Start date
OP
OP
OK, the work starts .... 
OP
OP
Cab now nicely sanded and edges done prior to decals. I like to colour code some of the edges rather than have the normal black showing, inc the start button recess.
OP
OP
Going to leave it for a weak or so now to let the paint harden.....
I will pop it all together in a couple of weeks and post the pictures.
I will pop it all together in a couple of weeks and post the pictures.
OP
OP
OK Decals go on.....
Note the blue edge at the bottom instead of the normal black.....
Note the blue edge at the bottom instead of the normal black.....
OP
OP
I am adding the invisible leg protectors that I always fit on on refurbs. I debur the edges and add more countersunk screw positions.
Note the gap between leg and cab below,....
Note the gap between leg and cab below,....
Last edited:
OP
OP
OK a few more pics including the vinyl matt photoshopped serials and stickers I have made and attached....
OP
OP
Nice finish to the BB
Perfect boards with no mods or hacks, all washed too.
Perfect boards with no mods or hacks, all washed too.
Last edited:
looks sweet man!!!
Cheers Kev
Cheers Kev
OP
OP
All finished ......
very very nice!!!
OP
OP
Thanks Kev,
What's your next project? I'm quiet at the moment just tinkering with my STTNG which is a very nice original. It came with the dome type cannons and lasers which had not been fitted so will incorporate them in the cannons.
Joules
What's your next project? I'm quiet at the moment just tinkering with my STTNG which is a very nice original. It came with the dome type cannons and lasers which had not been fitted so will incorporate them in the cannons.
Joules
OP
OP
Great, I look forward to the log...
what's the red stuff filler you used on the edge of the head ?
Cheers Kev
Wow great job. I hardly recognise this one that used to be mine and lived in the Pipeline for a year or so it looks good enough to eat your dinner off. You gonna do the playfield next?
I did that ropey sticker over the Drac track btw
I did that ropey sticker over the Drac track btw
OP
OP
The PF is just too good to swap out and I currently have a spare New Diamond Coated PF but to be honest I want to stay original. How bad was the damage under the sticker? the drac track looks fine as does the creature hole? I will send either this PF or an original from another MB resto I have lying around to Henrik I think....
Last edited:
OP
OP
Its 2 part Everbuild Wood Filler.
I tend to use hard wearing filler on anything that can take a knock. On the cab its generally fibre reinforced 2 part filler. Longer to sand but much tougher.
Cheers
J
