mjenison's Greed mod (TaF)

[Cryptkeeper]

https://pinside.com/pinball/forum/topic/the-addams-family-greed-mod

Any body interested in one of these?
Would be £19 delivered.
Below is my test run.

Cover needs some work.Illustrator is not my strong point but getting there.
top of book has a misprint.should be flat.

Register your interest here.
would like 10 to start.

 

[BigIan]

you don't hang about !!

Best put me down....

 

[Cryptkeeper]

you don't hang about !!

Best put me down....

Make hay while the sun shines and all that........your machine is the test subject.
So I'll be returned with whatever I can make installed

 

[BigIan]

make a creech holo

 

[Cryptkeeper]

make a creech holo

I'll look into it when i get my creech..........tips piggy bank upside down and nothing but dust comes out

 

[lukewells]

I don't have a TAF, but appreciate cool mods

 

[ronsplooter]

I've already ordered one of these from the guy in the states....think it's in the post as we speak

 

[Cryptkeeper]

no way!
I'm going to make protectors for TaF next week too,
What apart from the slings should I make?

 

[Paul]

Yes please

 

[replicas]

That's a sweet tasteful little mod.
I'd be up for one and I ain't even got a TAF at the moment.

 

[Calimori]

I am interested, put me down.

 

[Cryptkeeper]

Cool,
do you think I should make them like the book on the PF?
The 3d print is going to be in black .

 

[Calimori]

I think it would look great if it matched the playfield book, ties in the theme. But you are the mod maker, go with your vision.

 

[Cryptkeeper]

I'll draft in the missus over the weekend.
shes gots the photoshop skills I lack.
I'll do both and send both with each book + make the files available so you can reprint

 

[Sam C]

I saw this on Pinside as well, it's a lot like the Piano mod for TZ, I can see it being a must as it covers up boring bare wires and it fits so well, makes you ask why it wasn't there in the first place. If I had a TaF I'd be putting my name down too.

 

[ronsplooter]

@Cryptkeeper can you have a look at doing something similar but for the lamps over the thing lane. That's another couple of bare lamps that look a bit crap!

 

[Cryptkeeper]

Yea any ideas?

 

[BigIan]

Wednesday Addams or a thing hand

cousin it...

 

[Cryptkeeper]

Fitted the book earlier.
It looks fantastic!

 

[Diw]

Put me down for one.

 

[strongs]

Interesting. So correct me if I am wrong, does this replace the bookcase?

 

[Cryptkeeper]

No,
Not at all,
just covers the ugly two lamps above the bookcase.
Have the new art work done.
Just waiting on the man to finish the 3d prints.
Hes having some issues but should have them today/tomorrow

 

[strongs]

No,
Not at all,
just covers the ugly two lamps above the bookcase.

Lamps above the bookcase? There's a red and green lamp above the vault? Is this where you mean? I might be interested if I can understand exactly where this goes.

 

[Cryptkeeper]

Yep.
Sorry above the vault.
Check out the link in the first post.
Shows it fitted.
It looks fantastic fitted to be honest!

 

[strongs]

I see now. Will this fit with the brass vault toy also fitted next to it in the same area?

 

[Cryptkeeper]

I see now. Will this fit with the brass vault toy also fitted next to it in the same area?

I dont know is the honest answer.
The book doesnt add much width to the lamps at all so unless the brass safe is right up against the lamp/upright plastic I dont see why it wouldnt fit.

 

[BigIan]

before

and after

 

[Adrian Hufton]

Put me down for one too.
Thanks

 

[Cryptkeeper]

Should have the first 4 (hopefully more) ready to go by the end of the week,
its the 3d printing thats holding it up.
Its unfortunately out of my hands

 

[Cryptkeeper]

Just got the 3D printed books!
If you still want one drop me a PM.
I'll have them assembled tomorrow and ready to go out by lunch time.