What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete Mishmash self build - let’s make a pinball machine

Playfield needs some attention , so strip and clean. new rubbers ordered. It’s filthy. I cleaned it up a bit at first, but it needs a proper clean.

9054CAFA-1909-456E-BEAC-E64653A486F5.jpeg
702127B6-1109-4797-9606-5339A3A9A6FB.jpeg
4210BFCD-564A-4198-83C3-27EF26917819.jpeg

Next job is to sort out the 3 flipper mechs
 
Right flipper Eos switch and the upper flipper activation switch stack is a mess. I fixed it temp by sticking a rubber ring over one bit just to make it work.
246C4D48-BDA2-4845-A59C-091036BB87B8.jpeg

But now it’s all fixed properly with a brand new switch stack
18274E4F-211D-4FC5-B166-6898531E84D0.jpeg

Yes i know the rest of the assembly looks awful, but it’s working pretty fine so i’m going to leave it until later.

I have always struggled to work on the flipper assemblies when the playfield is raised, but today I discovered a new essential tool that makes the job so much easier :
39CF7A1C-978D-4542-8D9B-E29E6617227A.jpeg
With this I can easily reach everything on the playfield.
 
Back
Top Bottom