steve brum Site Supporter Joined Feb 15, 2015 Messages 6,280 Location Nuneaton Nov 11, 2016 #1 how long should you allow to fit a pair of these? advice appreciated
carl lawrence Site Supporter Joined Jul 31, 2011 Messages 2,499 Location Sandbach Nov 11, 2016 #2 I had 3sets sold one set still have the 2 left and still not fitted after 2 1/2 years
OP OP steve brum Site Supporter Joined Feb 15, 2015 Messages 6,280 Location Nuneaton Nov 11, 2016 #3 oh dear. I was hoping around an hour LOL im sure someone will have recently installed some
replicas Site Supporter Joined Jul 21, 2011 Messages 12,046 Location Lancashire Alias Nipper Pinball Nov 11, 2016 #4 10 mins
Sam C Site Supporter Joined Feb 8, 2012 Messages 1,646 Location Kettering, UK Alias Archy Nov 11, 2016 #5 Took me maybe 15 minutes to prepare and then 15 minutes to fit. Much harder with the playfield still in haha. Learned that the hard way...
Took me maybe 15 minutes to prepare and then 15 minutes to fit. Much harder with the playfield still in haha. Learned that the hard way...
OP OP steve brum Site Supporter Joined Feb 15, 2015 Messages 6,280 Location Nuneaton Nov 11, 2016 #6 much appreciated
Monkeyboypaul Site Supporter Joined May 29, 2013 Messages 5,559 Location South of York Alias Paul G Nov 11, 2016 #7 Depends how you fix it in, but 10-30mins probably. I use double sided tape.
lee riley Site Supporter Joined Nov 25, 2015 Messages 547 Location Keighley Nov 11, 2016 #8 15 minutes, using the screw holes is better than tape as they never stick properly
carl lawrence Site Supporter Joined Jul 31, 2011 Messages 2,499 Location Sandbach Nov 12, 2016 #9 Has anyone tryed contact adhesive ?
J.C.Rox Site Supporter Joined Apr 11, 2015 Messages 2,922 Location Haddington East Lothian Nov 14, 2016 #10
C chris b Registered Joined Apr 18, 2012 Messages 2,521 Location Bradford west yorkshire Nov 14, 2016 #11 5 mins to fit easier on the strens with 2 people one to hold in place and one to put the screws in bonding them in is not good or adeasive tape screws are the best way and always removable if you want to swap them out
5 mins to fit easier on the strens with 2 people one to hold in place and one to put the screws in bonding them in is not good or adeasive tape screws are the best way and always removable if you want to swap them out