What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Mirror Blades Installed

Marcel

Site Supporter
Joined
Feb 26, 2017
Messages
609
Location
Huddersfield
Finally got round to installing the blades. Thanks @ChrisB for the supply.

I've shown before & after lights on & off.

Very happy with the effect and product quality.12cb9030f6cfac355198546928fb7cf9.jpgfb260622e9826294e9f2175b900a47ae.jpg9433e32402b94d1ff0ed1c93a0c757f1.jpg412e2de5bab9006ec097037d69de239c.jpg3be968dea2a8c7f43044d5ebbec7da8f.jpgf2024d556ffb93b3379f853a6f81957c.jpgdcd3e88f05b8cc9b0c29165a72a38d1a.jpg00edc71f00eea0fb654d56adc8231878.jpg

Sent from the comfort of my Sofa
 
Nice nice.

Any tips? How did you fit them? The counter sunk screws or double sided tape? (or both)
 
I just used one countersunk screw per side as Chris provided, as well as the fat top box hole.
Seems to do the job just fine, there was a further countersunk screw available mid blade but I'm guessing this isn't necessary and that it may give possible rise to snagging, that's pure educated guesswork though.

Sent from the comfort of my Sofa
 
As for tips, fit either side first using the rear fat hole & make sure it sits in position whilst holding in place.

Eye a line through to make top edge of blade parallel to the cabinet edge just beneath the glass.
This is to get a perfect level front to back finish.

Then screw whilst it's level. It's easy peasy.

Sent from the comfort of my Sofa
 
Back
Top Bottom