Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted Metal lift trim 28.5" long for 1/8" backglass
- Thread starter JMP
- Start date
Lol...
1/8" is very thin for a back-glass.... ???
1/8" is very thin for a back-glass.... ???
OP
OP
Maybe it's my ****ty eyesight but appears to be 1/8" to me....... hang on
hold on.. maybe you are right!!!...
https://www.pinwiki.com/wiki/index.php?title=General#Backglass_Sizes
#learnsomethingneweveryday
https://www.pinwiki.com/wiki/index.php?title=General#Backglass_Sizes
#learnsomethingneweveryday
OP
OP
OP
OP
OP
OP
Paul's link confirms 1/8"
Have you tried @new forest pinball he hooked me up for my Rocky backglass mate
I picked up some metal lift trim for @new forest pinball for real glass, not sure what the width was though :-/
Edit: Jinx!
Edit: Jinx!
OP
OP
Will do, cheers fellas.
Looks like 3/16ths to me....
OP
OP
Eh... I may be a metric man but the glass edges are definately on the 1/8" markings... are you saying 3/16" (wider) as manufacturers recommended applying insulation tape along the glass first?
I wouldnt put insulation tape anywhere near a glass backglass... Maybe velcro (the soft part) inside the channel.... Have seen SO much damage caused by multiple types of Tape to backglass...
OP
OP
Yeah know what you mean, it appears that's what original manufacturer's recommended !? Think it's time for an email to Andy Netherwood.
John, this guy may be able to help you - he will cut to length
A friend and I bought several trims from him for EM glasses and they were very good quality
He goes under the name gatecrasher on Pinside (real name Jeff)
A friend and I bought several trims from him for EM glasses and they were very good quality
He goes under the name gatecrasher on Pinside (real name Jeff)
Hi all,
Yes we have a good stock of 1/8” and 3/16” lift trims, and plastic trim sets. All in mirror polished stainless steel.
D.m. For details.
Cheers Keef.......
Yes we have a good stock of 1/8” and 3/16” lift trims, and plastic trim sets. All in mirror polished stainless steel.
D.m. For details.
Cheers Keef.......
OP
OP
Hi all,
Yes we have a good stock of 1/8” and 3/16” lift trims, and plastic trim sets. All in mirror polished stainless steel.
D.m. For details.
Cheers Keef.......
Hi Keith, have already sent you message, cheers.
@DAD Thanks David but looks like probably sorted seeing Keith's message, cheers.
That's very useful to know Keef.Hi all,
Yes we have a good stock of 1/8” and 3/16” lift trims, and plastic trim sets. All in mirror polished stainless steel.
D.m. For details.
Cheers Keef.......
Do you also cut to length?
Thanks.
It will usually be when I get a replacement backglass for a Williams or some Bally EM as the old trims are usually too shot to re-use
It will usually be when I get a replacement backglass for a Williams or some Bally EM as the old trims are usually too shot to re-use
i just had two brand new glasses made. one in 1/8 and other 3/16. as per original specs