What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold Medusa with a prototype back glass

Status
Not open for further replies.

carl lawrence

Site Supporter
10 Years
Joined
Jul 31, 2011
Messages
2,612
Location
Sandbach
Selling my Medusa ,it is a fully working machine !!
Good points are :-
New lower flipper bats
New rubbers
New set of plastics
New bumper caps
New set of red drop targets
New set of white targets
New alltek mpu
All boards repair where needed!
All star posts taken off and clean
New coin door sticker!
Black glass been protected with krylon triple thick
Mylar to lower and upper playfield
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg


Bad bits
Scratches and chips to cab and backbox (well it is over 30years old)
Apron has scratches on
Playfield has very small ware in 3 places (insert ware on 6 medusa bonus ,under maylar,by display ,by shooter lane exit)
Unfortunately There is a bubble to the back glass

Yes it does have a playfield glass and lock down bar
Looking for£750 ono
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom