Manchester repairs and servicing

[Flyingmacca]

Hi you good folks… new to the pinball world. I am delighted to say that I am the proud owner of a Star Trek 25th anniversary pinball. Anyone know of someone who can advise or carry out some small repairs. Thanks in advance.

 

[Taxiturn]

If you can say what’s wrong with it, we might be able to help you fix it yourself for much less £££ than a tech call out

 

[Kaufmanised]

@philpalmer @CHRIS B PINBALLS @Pick Holder

 

[ronsplooter]

@pinsinthewild is up your way I think

 

[Flyingmacca]

If you can say what’s wrong with it, we might be able to help you fix it yourself for much less £££ than a tech call out

Thanks… basically there are a couple of niggles.
1. The transporter ramp does not work properly as when you get to 100% the special ramp goes up but then comes down so you can’t get the ball on the lower ramp IE enter the transporter.
2. When the ball goes into the centre target the ball gets stuck in the ramp below. I have noticed a small crack in the plastic so I guess the ball is getting stuck.
3. The right hand flipper sometimes sticks up but will go down by tapping the flipper button.

Thank in advance

 

[Ragnar1057]

I'm just down the road from you if you ever need any help with the electronics in your machine

 

[Flyingmacca]

Great that’s cool. I don’t think I’ve got any electronic issues as such. Do you want to come to me? M28 area. Regards Brian

 

[replicas]

Barry is local to you , @pinsinthewild .

 

[Flyingmacca]

Thanks, I’ve just sent him a message. Do you know where in Manchester he is?

 

[replicas]

Thanks, I’ve just sent him a message. Do you know where in Manchester he is?

Think he is near Oldham side

 

[Ragnar1057]

I'm just south of you - WA15 area

 

[Flyingmacca]

Great stuff that’s brilliant. Are you able to come to my home if needed? I live in Worsley.

 

[Ragnar1057]

Great stuff that’s brilliant. Are you able to come to my home if needed? I live in Worsley.

No problem. I tend to just do electronics work but I'm happy to help out if you need it

 

[fearn]

No problem. I tend to just do electronics work but I'm happy to help out if you need it

hi i am new to the site and just read your thread could you help me ive a shadow pin which has stopped working it turns on playfield lights up but no dmd and machine does not boot up so can not diagnose i need some one to look at it to see whats wrong tried barry but he is not available and no one else is local i live in Bredbury Skockport would be very grateful for any help and advise

 

[Ragnar1057]

I've just sent you a private message