Expired Lots of Stuff

[Dave Bishop]

Hi All.

just bought a load of stuff from a group member getting out of the pinball game..

Have picked it up and will be listing some stuff for sale:

stay tuned.

Update:
Been through it all. Lots of little things, but main items are:

4 x Coin doors - complete with. Wiring and C220 mech - SOLD
6 Standard lock bars 1990s - SOLD
2 Widebody lock bars - SOLD
4 Lockbar recievers - SOLD
6 sets of back box hinges - SOLD
3 x Ball troughs with boards and coils

Mint Congo Translite
2 x sets of legs- 1 chrome, 1 gold- but will need replating.

IJ (W) Captive ball wireform
STTNG launch/ swirl wireform - SOLD
Couple of TZ wire forms.. I think
CV wireforms

Few Circuit boards -
WPC89 CPU - inc ASIC chip - SOLD
DMD board,
10 Opto board, - SOLD
PinLed Flipper board- may need work.
AFM saucer board- with small Hack on back
AFM strobe board with new strobe bulb
Screen printed CFTBL Cabinet side decals only
IJ Gun handle - gold plated- doesn’t have trigger or inside switch/ wires

AFM plastics, -some used some new
MM plastic - some used, some new
NOS TOTAN assembly - outane plastic
NOS AFM 3 bank motor -!: plate - SOLD

 

[Dave Bishop]

Playfield supports

WPC 95 Speaker panel

 

[Dave Bishop]

Coin Doors- 1 remaining door

TOTAN Stuff

STTNG Stuff
Ball guides- complete set

swirl ramp 1 re wield on 1 spot



CONGO Translite

this door looks to be slightly bent in at the buttons

random Manuals - MM is repro & AFM obviously a print

IN 24ct Gold plated gun- but pitting/ metal
Imperfections Underneath

Ramps - dont know what they are for!? Anyon

CACTUS CANYON 14pc plastic set - NOS

STTNG Clear plastic set? - what ya see is what ya get!


some Cliffys & Mantis protectors
Monster Bash, CFTBL , AFM

 

[ronnie63]

How much for one of the place holders Dave?

 

[Deleted member 2463]

Can I get a load of stuff - is it NIb?


Sent from my iPhone using Tapatalk Pro

 

[Jagspete]

How much is lots?

 

[Skippy]

anticipation killing me, can't wait to see what i can't afford.

 

[Rpearsonx]

Ohhhh

 

[Banzaipinabll]

Prices??

 

[Calimori]

Great job lot there

I am interested in a standard lock down bar
A lockdown bar receiver
A coin door, single slot if you have one
The Wpc89 board if available
Display driver board
10 opto board

How are you working out process?
Updated as I reread.

 

[Deleted member 2463]

Man I was hoping for toppers.


Sent from my iPhone using Tapatalk Pro

 

[PinIB]

Hi

I’d be interested in the STTNG cannon loom, a standard lockdown bar and a wide body lockdown bar if possible.

Thanks

Ian

 

[Paul]

interested in this, however it needs prices really!!

Interested in
Single slot coin door (The "slightly bent front door" one in the pics looks fine to me...)
Standard lockdown
Widebody lockdown

Cheers
Paul

 

[Dave Bishop]

Hi Paul
Sorry, it’s been PM manic.

the coin door has been sold, and the Widebodys Lock bars too.

I think I have a standard lockbars left. But I’m not sure.

I will update the thread.

 

[BigIan]

Interested in playfield support depending on price. Possible other stuff again depending on pricing

 

[Moonraker]

Unknown Ramps...

Top left and right I think are CV.
Bottom left and right TZ bottom center ST:TNG

 

[Dave Bishop]

Thanks!
Haven’t got a clue what I’m going to do with them.

 

[Dave Bishop]

Hi All
I’m working through all the PM’s in time order and responding to people’s enquires.
I have sold some stuff.
I have another lock bar that wasn’t listed- this one seems a bit deeper than the others.. looks to still be a standard tho. Is this for earlier Bally/Williams games?

it differs from the others as the the inside metal edge goes all the way across in one piece..

 

[Calimori]

Are you going through the posts or just the PM’s as I only posted?

 

[Dave Bishop]

CPU 89 boards need to be tested- one looks
Clean and the other has a few hacks.
The 10 Opto is a Great Lakes modular - don’t know if I have any games that I can test it on.. will have to look it up

 

[Dave Bishop]

Update: I have had a lot of PM’s - and some stuff gone. 2 coin doors gone, 2 Widebody lockbars gone. Manny rails gone. STTNG. Wire Looms gone. CPU boards - awaiting testing - spoken for if all good. TOM trunk gone.

think I have 1 standard lock bar left.

Still have what’s in the pictures above- and gearing up for Round 2..

 

[Dave Bishop]

Next up couple of ball troughs complete with boards and coil.
Previous owner used to buy complete new assembly when refurbing games.

Ball Trough from Williams IJ - believe was working but cannot test as don’t have a game that uses 7 balls

ball trough No 2 complete with boards and coil. Plugged into AFM And boards tested fine.

£65 each + postage

last Coin door £65 + posta


AFM center ramp -
Never used by the looks of it- but 2 small cracks- well not even sure they are cracks £30 + postage

 

[Dave Bishop]

scoop light mods- I think made by the legend mod maker @Judge Dreads.I think one is for TOM trap door.. can’t make out the others from the Bulb boards.. Anyway.. £10 each..

 

[Dave Bishop]

Decals from Treasure Cove in US.. some inspected sticker names of Allen.. (R.I.P)

people that have bought Lockbar receivers will get a CAUTION sticker and Install 3 & 4 Ball sticker.
Contact me if interested In Specific ones.. maybe I can throw a couple gratis with other stuff

 

[MadNat]

The Totan apron art would be handy if still available? The Totan plastics maybe a good backup also… could you confirm the prices if they haven’t gone already? Thanks. [emoji106]

 

[Judge Dreads]

2 sets of Hinges - £20 each pair
View attachment 138943

scoop light mods- I think made by the legend mod maker @Judge Dreads.I think one is for TOM trap door.. can’t make out the others from the Bulb boards.. Anyway.. £10 each..
View attachment 138945

Centre is Trap for TOM, bottom is the shooter lane scoop light for TZ, top is slot hole light for TZ, bargain when you consider the price of a Cliffys

 

[Sgt GrizZ]

Centre is Trap for TOM, bottom is the shooter lane scoop light for TZ, top is slot hole light for TZ, bargain when you consider the price of a Cliffys

@Dave Bishop I'd take the TZ Slot machine scoop light please

 

[Dave Bishop]

Hey Sarge!
Sure TZ one is yours..

 

[paddythegreek]

Tom trap cliffy if still available please. Ken
Oh and a set of b/box hinges

 

[Andy1]

How much for decal set with ‘super pin’ that’s the one I really want