Kitchen Refurb - Getting Matching Doors/ Cabinets

[DRD]

I'm wondering what to do about a 17yr old kitchen with high gloss white doors. No idea who originally installed it or what brand the stuff is. I have fitted a fair few kitchens and could junk the whole thing and start from fresh, but I'd rather not

I want to extend it/ put an L shape onto a straight run/ insert 2x tall units with integrated appliances where there is currently low level plus wall cupboard over

Has anyone on here got experience of matching doors/ inserting additional cabinets to an existing kitchen ? Is there a good central place/ large supplier that can achieve this - or do you just take a door round magnet/ howdens/ diy-kitchens etc etc and do the best you can ?

Thanks

 

[Arv]

As you say I'd go DIY kitchens and replace all the doors with the same.

 

[Paul]

@replicas Any thoughts Daz?

 

[neil1637]

You can get full wraps for kitchens. Doors, tops, etc. No idea on how good, or hard wearing though.

 

[Cooper]

There is sometimes the manufacture printed on the hinges of the door or at the back of the carcass (check wall units as well) or inside the draw

 

[replicas]

I’m a kitchen fitter and have been for 37 years, if you want my advice then start a fresh with new cabinets . It’s the best and easiest way forward.

 

[DRD]

I feared that might be the case, thanks Daz

 

[carl lawrence]

Totally agree with Daz I to a Kitchen fitter / carpenter / joiner for x number of years . The reason is every kitchen company have different sizes of units or doors ,ie door height will be bigger or smaller or the depths of the units will be bigger or smaller than what you need and that is just the starters ,because the hinges are in the wrong place and so on .
Yep ! as they say, been there ,done that and got the T-shirt