Hi all
I've got a problem with my Junkyard blowing fuse F103 (high power solenoids). After a little diagnosis, it appear that the one of the coils (Refrigerator Popper) is receiving a pretty constant 70v (should be 50v) even when it isn't being triggered. I disconnected the coil and measured the voltage across the inputs.
I presume this is a board issue? If so, what should I be looking at?
Thanks in advance!
I've got a problem with my Junkyard blowing fuse F103 (high power solenoids). After a little diagnosis, it appear that the one of the coils (Refrigerator Popper) is receiving a pretty constant 70v (should be 50v) even when it isn't being triggered. I disconnected the coil and measured the voltage across the inputs.
I presume this is a board issue? If so, what should I be looking at?
Thanks in advance!