Just home yesterday after a long time out on loan, so I’m sprucing her up:
Replaced lock with keyless one
Replaced trim
Replaced rubbers
Installed trough sleeve
Installed 50mm Teflon gliders on feet
Gonna desolder a chip on cpu to install NVRAM
Last job is the strobe not working. What do I need to check or replace, is it a bulb, a board, a chip, or what?
Replaced lock with keyless one
Replaced trim
Replaced rubbers
Installed trough sleeve
Installed 50mm Teflon gliders on feet
Gonna desolder a chip on cpu to install NVRAM
Last job is the strobe not working. What do I need to check or replace, is it a bulb, a board, a chip, or what?