Help diagnose a FT switch issue - Solved

[MadNat]

My FT was working fine. I’ve striped the top of the playfield to clean it. After reassembly the reel continuously turns. In switch tests Switches 37 & 38 (reel opto 1 & 2) constantly switch on and off.

A bit of research suggests this could be a bad diode on the switch matrix. Not 100% sure.

Any thoughts or advice very welcome.

Thanks

Mike

 

[MadNat]

My FT was working fine. I’ve striped the top of the playfield to clean it. After reassembly the reel continuously turns. In switch tests Switches 37 & 38 (reel opto 1 & 2) constantly switch on and off.

A bit of research suggests this could be a bad diode on the switch matrix. Not 100% sure.

Any thoughts or advice very welcome.

Thanks

Mike

Always check your ribbon cables... not my brightest moment!



Sent from my iPhone using Tapatalk

 

[M4carp]

Yep they can be a pain!