GORGAR RUBBERS LIST/MAP

[stevebm1]

does anyone have a list/map of gorgars rubbers,im struggling to find one on the web,you can't see the lists in the pictures of the ebay kits.I have a hand written list that came with the machine when I bought it,but im not sure it's correct


5 x 27/64" minipost

10 x 5/16"

1 x 3/4"

1 x 1-1/4"

1 x 1-1/2"

4 x 2"

4 x 2-1/2"

2 x 3"

 

[carl lawrence]

I will have a look now !

 

[carl lawrence]

Big sorry for the delay ,had I good look for it and I cannot find it anywhere

 

[stevebm1]

Big sorry for the delay ,had I good look for it and I cannot find it anywhere

thanks for trying,I may just have to strip the exsisting ones off and measure them I guess,bit of a pain in the **** to do,but needs must

 

[carl lawrence]

thanks for trying,I may just have to strip the exsisting ones off and measure them I guess,bit of a pain in the **** to do,but needs must

Come to think of it that's what I did
Just in case you don't know ,when you take the rubber of the post ,the size of the rubber is written on the side ,so there is no need to measure them !!

 

[Jay Walker]

I have a Gorgar handbook at home, i'll have a look & get back to you if it'll help.

Rats! Those small booklets don't even list the sizes used.

 

[pinballmania]

does anyone have a list/map of gorgars rubbers,im struggling to find one on the web,you can't see the lists in the pictures of the ebay kits.I have a hand written list that came with the machine when I bought it,but im not sure it's correct


5 x 27/64" minipost FIVE

10 x 5/16" THIRTEEN

1 x 3/4" NIL

1 x 1-1/4" NIL

1 x 1-1/2" FOUR

4 x 2" FIVE

4 x 2-1/2" THREE

2 x 3"

NIL

TWO FLIPPER

ONE TIP

My records are annotated above

I also have a map if you want to email me. Pinballmania@btinternet.com

But I also have another resource that disagrees. Perhaps you could put the record straight once you're done b

 

[stevebm1]

thanks for the reply,pinballmania iv'e emailed you about some rubbers,I some already but need to stock up on some others.

 

[stevebm1]

ok so here is the one I got off andy,in case anyone needs it for reference,it does differ from the above list,when I re rubber,I will see how they compare