With all my projects complete I'm looking for some pins to keep me busy.
I have new cliffy's arriving for the scoop and posts (carbon fibre washers).
Along with a new magnet coil (you may want to keep this disabled however as people from the forum have mentioned these like to fail.
Machine looks to have had some chipping under a washer by the drum popper. This is however covered up by the washer as well as the new cliffy washers I'll install on Monday.
No other chipping or pooling I have observed.
At present I'm interested in trades of Bally/Williams machines but would also consider sterns.
A monster bash is high on my list.
Machine is in great condition with red titan rubbers across 2/3 of the playfield with some stock clear silicon rubbers at the back (these were pretty much brand new so left them in place) I will supply the full remaining rubbers if you do want to replace them regardless.
There is a oil spot on the glass where the previous owner used some sort of acidic cleaner... It's however in the apron area so not a major issue (see picture)
Machine has roughly 1000 plays.
Any other questions please ask.
Scott















I have new cliffy's arriving for the scoop and posts (carbon fibre washers).
Along with a new magnet coil (you may want to keep this disabled however as people from the forum have mentioned these like to fail.
Machine looks to have had some chipping under a washer by the drum popper. This is however covered up by the washer as well as the new cliffy washers I'll install on Monday.
No other chipping or pooling I have observed.
At present I'm interested in trades of Bally/Williams machines but would also consider sterns.
A monster bash is high on my list.
Machine is in great condition with red titan rubbers across 2/3 of the playfield with some stock clear silicon rubbers at the back (these were pretty much brand new so left them in place) I will supply the full remaining rubbers if you do want to replace them regardless.
There is a oil spot on the glass where the previous owner used some sort of acidic cleaner... It's however in the apron area so not a major issue (see picture)
Machine has roughly 1000 plays.
Any other questions please ask.
Scott














