I bought this machine recently. It was actually outside in a garden but was well covered. Owner said it stopped working and he couldn't fix it.
The cpu was badly corroded although the 3 x D cell Duracells were located off the board.
The game is now fully working after replacing the shorted line filter, replacement CPU board, ribbon cable and game ROM. CPU board is a nice one from a Funhouse. The DMD is very good no faults.
Selling as a project - although it now plays OK with everything working. I have other projects that I'd rather be doing and need the space.
The pictures show the game on decent chrome legs but these are my spares - see photo of legs which belong to the game. The feet are all free and decent enough.
The cabinet is solid but faded and the backbox sides are not great with the left side delaminating at the back edge. The side rails have small dents but not that bad. The lock bar has a couple of small marks.
The translite looks a bit faded and has a few marks. Repro available from Pinball Center if required.
I have replacement plastics for all the broken ones and I have a blue and a yellow box target on order to replace the broken / wrong one. Also have a new plastic chrome strip for the backbox top.
Hopefully the photos show everything in reasonable detail but if you need anything else just ask.
Asking £1,200.
The cpu was badly corroded although the 3 x D cell Duracells were located off the board.
The game is now fully working after replacing the shorted line filter, replacement CPU board, ribbon cable and game ROM. CPU board is a nice one from a Funhouse. The DMD is very good no faults.
Selling as a project - although it now plays OK with everything working. I have other projects that I'd rather be doing and need the space.
The pictures show the game on decent chrome legs but these are my spares - see photo of legs which belong to the game. The feet are all free and decent enough.
The cabinet is solid but faded and the backbox sides are not great with the left side delaminating at the back edge. The side rails have small dents but not that bad. The lock bar has a couple of small marks.
The translite looks a bit faded and has a few marks. Repro available from Pinball Center if required.
I have replacement plastics for all the broken ones and I have a blue and a yellow box target on order to replace the broken / wrong one. Also have a new plastic chrome strip for the backbox top.
Hopefully the photos show everything in reasonable detail but if you need anything else just ask.
Asking £1,200.
