Wow this is going to be a long journey, I need the following fuses for a Williams system 6 machine, I assume Maplin would stock them?
F1 - Display Fuse, 1/4 amp slo-blo
F2 - Solenoid Fuse, 2 1/2 amp slo-blo. Probably the most common fuse to blow, you should keep a good stock of these.
F3 - Lamp Fuse, 8amp (not slo-blo!)
F4 - Flipper Fuse, either a 10amp or 15amp slo-blo. If your game has 2 flippers, then use a 10amp, 3 or more then use a 15amp.
F5 - Logic Supply Fuse, 4amp (also not slo-blo!)
On the Fuse Card (left to right):
6F1 - General Illumination Fuse, 20amp
6F2 and 6F3 - Logic Supply main fuses, 4amp slo-blo
F1 - Display Fuse, 1/4 amp slo-blo
F2 - Solenoid Fuse, 2 1/2 amp slo-blo. Probably the most common fuse to blow, you should keep a good stock of these.
F3 - Lamp Fuse, 8amp (not slo-blo!)
F4 - Flipper Fuse, either a 10amp or 15amp slo-blo. If your game has 2 flippers, then use a 10amp, 3 or more then use a 15amp.
F5 - Logic Supply Fuse, 4amp (also not slo-blo!)
On the Fuse Card (left to right):
6F1 - General Illumination Fuse, 20amp
6F2 and 6F3 - Logic Supply main fuses, 4amp slo-blo