I'm rebuilding the flipper mechanisms on a Fish Tales and would appreciate a bit of help please.
I've done the right flipper and set it at a similar resting position as the original left flipper (i.e. lined up with the inlane). When I manually push up on the flippers, the old flipper moves much further (62mm at the tip) than the updated flipper (51mm). I've had a quick play and this makes a big difference (can't backhand anything with right flipper). Before I move on to changing the left flipper mech, I wanted to know if this is normal or have I made a mistake somewhere, so any advice would be appreciated. Thanks..... Paul.
I've done the right flipper and set it at a similar resting position as the original left flipper (i.e. lined up with the inlane). When I manually push up on the flippers, the old flipper moves much further (62mm at the tip) than the updated flipper (51mm). I've had a quick play and this makes a big difference (can't backhand anything with right flipper). Before I move on to changing the left flipper mech, I wanted to know if this is normal or have I made a mistake somewhere, so any advice would be appreciated. Thanks..... Paul.