What's new

Sold Flintstones £1300

Marvello

Site Supporter
Joined
Oct 6, 2015
Messages
3,652
Location
Oldham, Greater Manchester
Alias
Marv
Time to sell my Flintstones to make way for another Pin - £1300.

Good points:
Fully working
Dinosaur light mod
LED inserts, the rest incandescent. Best combination for this Pin IMO.
Flintstones cartoon decal
Previous owner did a full playfield strip and clean and rebuilt all 3 flippers.

Notable bad points:
Far right line of the display is out but this is barely noticeable - very few graphics are clipped because of this and I only noticed it when I was in the menus.
Lockdown bar holes
Glass isn't perfect
Inside of the cab is a bit dirty

Cabinet/decals pretty good for its age/history, the head less so.

Really fun to play, perfect for kids and adults alike. Started having 2nd thoughts about selling it as I was preparing this advert. I can just about squeeze 3 pins in but it makes it cramped and awkward, and means moving my MAME cab out so it's for the best that I sell it. I can always buy it again down the line if I miss it that much.

Still gets as much play as my WOZ, if not more, but as I came to pinball late my plan is to buy-play-sell and try not to lose too much money while doing so.

Seems to be a forum Pin as I'm at least the 4th forum owner.
Currently has a battery extender in it which I will be taking out and will put batteries in the normal holder.
The Joe's Diner plastic is homemade as it arrived with me without it.

Located in Oldham.

20170505_201540.jpg
20170505_203350.jpg
20170505_201730_001.jpg
20170505_201747.jpg
20170505_201657.jpg
20170505_201840.jpg
20170505_201850.jpg
20170505_201914.jpg
20170506_102259.jpg
20170506_103344_001.jpg
20170506_102315.jpg
20170506_102348.jpg
20170506_102746_001.jpg
20170506_102818.jpg
20170506_104325.jpg
20170506_104409.jpg
20170506_104441.jpg
20170506_104800.jpg
 
Plse ignore my post....should have been a pm...
 
Last edited:
Might it be a hack to deal with double wires going into single crimp connectors?

They are a pig to do, but with patience and decent music playing it is perfectly doable
 
When a Molex burns out it's hard to fit a new one in the cab if the wires are tight and the ends have burnt and need to be snipped back a cm. Adding extenders to the Molex outside the cab then connecting up with choc-blox seems an obvious and unharmful hack to me. Far better than trying to pull old wires through the cab to gain an extra inch or 2. Wouldn't put me off in the slightest, wish I had the dosh as would be all over this at the price, good luck with sale...
 
Great game to play with lots to do. Playfields on these always seem super tough aswell. Always look nice with some quality leds in the inserts.
Great value machine.
 
Back
Top Bottom