Finally, Pulp Fiction

[Marvello]

Pondering buying - but Martin the Courier says beware door width issues. What would be the minimum door width needed to get this into my house?

Post in thread 'Finally, Pulp Fiction'

24" title="Nov 25, 2024 at 2:39 PM">Nov 25, 2024

30 1/8" = 76.2cm

Taken from Pinside:

To answer some open Questions. How tall is the game with and without the topper.
The other question is the width of the backbox.

First the boxed dimensions are 31" x 34" x 56-1/4". Palleted on a 36" x 36" Pallet adds a few inches to 61-3/8"
Unboxed setup dimensions are 51-1/2" L x 30-1/8" W x 74-3/8" T.
Topper adds 9-1/2" to the game in height.
Lots of doors are 28-1/2" to 30". This backbox is a retro style backbox that is 30-1/8". The backbox comes of the hinges fairly easily and a set up video will be done shortly by Butch Peel (who by the way...

• Marvello

 

[Annualman]

Post in thread 'Finally, Pulp Fiction'

24" title="Nov 25, 2024 at 2:39 PM">Nov 25, 2024

30 1/8" = 76.2cm

Taken from Pinside:

To answer some open Questions. How tall is the game with and without the topper.
The other question is the width of the backbox.

First the boxed dimensions are 31" x 34" x 56-1/4". Palleted on a 36" x 36" Pallet adds a few inches to 61-3/8"
Unboxed setup dimensions are 51-1/2" L x 30-1/8" W x 74-3/8" T.
Topper adds 9-1/2" to the game in height.
Lots of doors are 28-1/2" to 30". This backbox is a retro style backbox that is 30-1/8". The backbox comes of the hinges fairly easily and a set up video will be done shortly by Butch Peel (who by the way...

• Marvello

Thank you

 

[Gonzo]

Thank you

Just in case