Wanted Elvis plastic upper playfield

[robertlucas1970]

Anybody got a new upper playfield they no longer need ?
I thought it was made of acrylic, have spent a good hour trying to polish it with T-cut and Novus, but not making any difference.
I have polished lots of acrylic things over the years and they come up like new, but this must be made of something else.
Also tried to flame polish and it made it go misty, so need a nice clear new one now, before I pay the £60 shipping and then £23 customs again from Marco I thought I would just ask on here
Many Thanks

 

[cr5000462]

Can they not be made by the chap on the forum that makes plastic protectors? (Sorry can't remember his name)

 

[J.C.Rox]

@Colywobbles

 

[Colywobbles]

Anybody got a new upper playfield they no longer need ?
I thought it was made of acrylic, have spent a good hour trying to polish it with T-cut and Novus, but not making any difference.
I have polished lots of acrylic things over the years and they come up like new, but this must be made of something else.
Also tried to flame polish and it made it go misty, so need a nice clear new one now, before I pay the £60 shipping and then £23 customs again from Marco I thought I would just ask on here
Many Thanks

View attachment 115244

What is the size of the playfield as I can only currently do 325 x 220
However I am in the process of getting a much larger laser but it’s looking at September due to budget.
So if it’s too big and you can put up with the stinker you have for the short term I will eventually sort it for you just pm me

Col

 

[Epotech]

Col. I think I sent you the DXF for this. If I didn't I'll see if I can find it.

 

[robertlucas1970]

What is the size of the playfield as I can only currently do 325 x 220
However I am in the process of getting a much larger laser but it’s looking at September due to budget.
So if it’s too big and you can put up with the stinker you have for the short term I will eventually sort it for you just pm me

Col

That would be great, I do have a cheap 40 watt China laser that I have never set up, pretty sure it would not cut this thickness anyway.
I will measure it when I get home and let you know if it will fit on the laser.
Many Thanks

 

[Colywobbles]

Col. I think I sent you the DXF for this. If I didn't I'll see if I can find it.

I’m don’t think there was anything in the file tbh m8
I’ll have another look at it tomorrow but I’m almost sure it was just a couple of non descript rectangles.
Col

 

[robertlucas1970]

What is the size of the playfield as I can only currently do 325 x 220
However I am in the process of getting a much larger laser but it’s looking at September due to budget.
So if it’s too big and you can put up with the stinker you have for the short term I will eventually sort it for you just pm me

Col

Its not going to fit
But when you get that new laser I will have a couple of these please if you can do them.

 

[Colywobbles]

Dam soooo close, just hold ya passion. I would have had the new one sooner but with the hold ups in shipping and these machines all primarily from china they now quoting end of sept beginning of October.