Elvira HoH - motors not working

[Mfresh]

I had a little issue today with the playfield getting jammed in the wrong position. Managed to free it and get it back on the rails, but now the cellar and dead head motors are not working. The machine was off at the time. Is there an obvious wire or plug that serves both these motors that may have been squashed that I should be looking for?

 

[Deleted member 2463]

they are all on node board 1 I think, check that.

have you check the comms for the node boards? in the menus

 

[Mfresh]

Thanks Neil. It was a connector knocked off the motor control node board. Plugged it back in and back working again!