P Proud Site Supporter Joined Jun 4, 2022 Messages 62 Location Coventry Alias Proudie Apr 5, 2023 #1 Wanted eddy board for road show thanks
Spandangler Site Supporter 10 Years Joined Jul 21, 2011 Messages 6,536 Location Suffolk Apr 5, 2023 #2 Does @stumblor pinball do a Steady Eddy board?
OP OP P Proud Site Supporter Joined Jun 4, 2022 Messages 62 Location Coventry Alias Proudie Apr 5, 2023 #3 They did but I emailed them but said had no plans to do another run of these . Thanks for replying
Spandangler Site Supporter 10 Years Joined Jul 21, 2011 Messages 6,536 Location Suffolk Apr 5, 2023 #4 Ah sorry mate didn’t realise
Monkeyboypaul Site Supporter 10 Years Joined May 29, 2013 Messages 5,562 Location South of York Alias Paul G Apr 5, 2023 #5 £50 plus postage from Oz land Smart Eddy - Automatic Eddy board for Bally Williams machines www.tanglestech.com Or I might have a spare original, as got 3x Pinbits boards to go in mine.
£50 plus postage from Oz land Smart Eddy - Automatic Eddy board for Bally Williams machines www.tanglestech.com Or I might have a spare original, as got 3x Pinbits boards to go in mine.
OP OP P Proud Site Supporter Joined Jun 4, 2022 Messages 62 Location Coventry Alias Proudie Apr 5, 2023 #6 Ok thanks for that will order from down under
Arv Registered 10 Years Joined Jul 21, 2011 Messages 3,433 Alias . Apr 5, 2023 #7 Or just replace the pot for under a fiver. POT for Eddy sensor PCB - Pinball Heaven 10K Pot (Variable resistor) for the Trunk and Hocus Pokus outlane eddys sensors. If yours are unreliable, you need this part! www.pinball.co.uk
Or just replace the pot for under a fiver. POT for Eddy sensor PCB - Pinball Heaven 10K Pot (Variable resistor) for the Trunk and Hocus Pokus outlane eddys sensors. If yours are unreliable, you need this part! www.pinball.co.uk
OP OP P Proud Site Supporter Joined Jun 4, 2022 Messages 62 Location Coventry Alias Proudie Apr 28, 2023 #8 Found one now thanks