Widnesbernie
Site Supporter
I need to replace the screws holding in the yellow stand up targets on my EBD.. I can measure the screw, but I don't know what size of thread I am looking at.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
EBD Yellow Target Screw Thread Size Needed
- Thread starter Widnesbernie
- Start date
No idea - have you checked the parts catalogues: https://www.pinwiki.com/wiki/index.php/Bally/Stern#Parts_Catalogs
doh,ignore me,only just got up,reading your post again,I see you want screws not bolts
- Joined
- Jul 21, 2011
- Messages
- 2,508
Do you mean the screws that fix it to the playfield.
The first is #6 gauge which was originally used, but if the wood is not gripping the second #8 gauge willpass through the target mount and grip the wood. Both are the same length
The first is #6 gauge which was originally used, but if the wood is not gripping the second #8 gauge willpass through the target mount and grip the wood. Both are the same length
think the yellow standup targets are bolted to the drop target frame. 6-32 ?
OP
OP
Widnesbernie
Site Supporter
Can't see them in the parts catalogue in the picture of the unit. I was thinking 6-32, but some switch stack screws are apparently 2-56
, but I don't know how large/ small these are.
Once I know the thread I will need to re tap the holes in the unit as well as a couple damaged the screws.
compare to a 6-32 - top of the posts that hold your plastics on and have cap nuts
OP
OP
Widnesbernie
Site Supporter
Will try later, thank you.