What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Dune, by Barrels of Fun

JMP said:
Yes, nothing triggering. I've deduced today it's only in certain modes such as Harvester 1 battle. Get it going, take the ball off the pf and it will fire up/down very quickly itself without any trigger from the ramp entrance opto. Have taken a vid and will ask BoF about it.
Click to expand...

Just to clarify, Bof coders have confirmed this is normal. The diverter mech fires up at game start to free any stuck balls and also a 'post down' command (meaning it shoots up and back down) every time the Ornithopter moves left to right and right to left in Harvester Battles. A little strange to me, but there you go in case anyone else finds it odd and thinks something is wrong.

Have found the response and help from Jess at BoF really good and hope that keeps up as more games come out, for if and when.
 
Code in and came across this issue almost straight away

Also, should there be a battery in the holder ??
 

Attachments

  • IMG_2485.webp
    IMG_2485.webp
    150.8 KB · Views: 35
  • IMG_2484.webp
    IMG_2484.webp
    116.7 KB · Views: 35
No, it was only 2 balls left of a 3 ball multi all and i drained one then locked the desert one, it confused itself and then after a ball search dropped them both out and off we went again
 
FAST Neuron with labels.webp

Battery needed for soft start. No idea if BOF use this or not. I'd log a ticket with support.
 
They don’t come fitted with a battery I don’t think never seen one fitted to any of the games


Photo added from the game we took the head box off the other week so this was fresh out the box

IMG_6163.webp
 
Looks like lots of features on the board not utilised, is it a generic board? FAST or something?

EDIT: LOL can see it printed on the board above.
 
I see this as a win, with an after party
 

Attachments

  • IMG_2369.webp
    IMG_2369.webp
    102.5 KB · Views: 17
  • Like
Reactions: JMP
More time spent on the game this weekend, feels a bit muggy now, the pain box ball save didn’t register a couple times when active. The issue prior and just other parts that felt the game had become confused ?
Just me ?

The light and sound feels nice though. the upper loop is just like Rick n Morty. Once you miss the shot you ain’t getting it back
 
Think yours is yours an early model? Trust you've updated to the recent code. Apart from sticking locking posts into the Arena needing a simple twist on one of them, mines been fine.

Have noticed an occasional crackle in speakers sometimes when turn on though.... switch off and back on always sorts it.
 
JMP said:
Think yours is yours an early model? Trust you've updated to the recent code. Apart from sticking locking posts into the Arena needing a simple twist on one of them, mines been fine.

Have noticed an occasional crackle in speakers sometimes when turn on though.... switch off and back on always sorts it.
Click to expand...

My post is in relation to the new code update

your sticking posts will be because of how they are installed. Some have a 3d block which doesn’t help but ultimately the posts need taking out , locktite putting on the thread and tightening up again but with a little slack left in them so they don’t bind

The crackle i had , it was bad. I replaced the filter
 
OK will consider that if gets worse but only does the crackle very occasionally. Posts have been fine since I gave one a slight twist.

New code works fine on mine, strange.
 
You must log in or register to reply here.
Back
Top Bottom