Dodgy insert light

[RudeDogg1]

On my tz one of the 4 main door panel insert lights seems to be iffy. Sometimes it works sometimes not and it does the same if you swap the bulb holder. I've reflowed the connector pins on the light board aswell as any solder points and it worked for a day or 2 but it's started doing it again

you can see in this vid it's lighting very faintly

 

[kevlar]

Gotta be a poor connection somewhere Rudy, dim lamp = high resistance connection as far as I know.

 

[Carl Spiby]

Maybe its the actual molex plug that goes into the light board.

 

[RudeDogg1]

I might try punching the wires back down in it tomoz