I have got my Lethal Weapon 3 back together and replaced the DMD power board with a rottendog one, the DMD now powers on, but it is garbled. Please see below. Any help would be appreciated.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
DMD problem
- Thread starter Andypc
- Start date
OP
OP
Tested the DMD on a different game and it does the same thing.
- Joined
- Jul 21, 2011
- Messages
- 11,336
- Alias
- Ive
Hate to say it.,,, but I had a Rottendog DMD driver board fail after a few months and the display looked similar :-(
Can you try the DMD in another game with a known working driver board to confirm it's OK?
Sent from my D5833 using Tapatalk
Can you try the DMD in another game with a known working driver board to confirm it's OK?
Sent from my D5833 using Tapatalk
OP
OP
Yes, I tested the DMD in my TOM and it's the DMD that is the problem as it did the same thing.
OP
OP
- Joined
- Jul 21, 2011
- Messages
- 11,336
- Alias
- Ive
So with the Rottendog board out of the equation the DMD was still garbled?
Sent from my D5833 using Tapatalk
Tracks can be jumpered to good effect... how bad?
OP
OP
Unfortunately yes. Plugged it straight into my TOM and it did the same.
