.
NOTE at 30-9-2017:
Currently I manufacture and offer my DMDMK66 Multicolor DMDs, with my own firmware, better than DMDST32. With DMDMK66 does not need pay key licenses and do not need wait for any activation.
Also I'm developing the Magic Color Editor Tool to may apply advanced color frame by brame to all DMDMK66.
So I suggest check all information in last posts of this thread to be informed about current developments, because of first posts are currently out of date about DMDST32 that I have stop to manufacture.
All about DMDMK66 start in page 14 of this thread:
http://www.pinballinfo.com/communit...28x16-manufactured-by-pinballsp.33923/page-14
Thank you.
.
Hello everybody
I have develop and manufacture this DMD RGB multicolor, compatible with real pinball and virtual pinball. It is fully compatible with PIN2DMD. I have three versions, the latter is the DUAL which also supports connection to a "topper".
You can see more information on my Facebook https://www.facebook.com/Pinballsp or message in this forum Pinside https://pinside.com/pinball/forum/to...1#post-3225633-SD- pinballspcom.
The full assembled DMD price is 164 euros, with several optional extras; WIFI + 4 euros, Serial Port + 4 euros, CR2032 battery holder + secondary oscillator for first animated clocks and remote Source + 3 euros, A dual-release connector (topper) 2 euros.
Delivery worldwide by courier.
Contact email pinballsp@gmail.com, pinballsp Skype, e https://www.facebook.com/Pinballsp Facebook, WhatsApp +34 693 344 445.
Kind Regards.
.
NOTE at 30-9-2017:
Currently I manufacture and offer my DMDMK66 Multicolor DMDs, with my own firmware, better than DMDST32. With DMDMK66 does not need pay key licenses and do not need wait for any activation.
Also I'm developing the Magic Color Editor Tool to may apply advanced color frame by brame to all DMDMK66.
So I suggest check all information in last posts of this thread to be informed about current developments, because of first posts are currently out of date about DMDST32 that I have stop to manufacture.
All about DMDMK66 start in page 14 of this thread:
http://www.pinballinfo.com/communit...28x16-manufactured-by-pinballsp.33923/page-14
Thank you.
.
Hello everybody
I have develop and manufacture this DMD RGB multicolor, compatible with real pinball and virtual pinball. It is fully compatible with PIN2DMD. I have three versions, the latter is the DUAL which also supports connection to a "topper".
You can see more information on my Facebook https://www.facebook.com/Pinballsp or message in this forum Pinside https://pinside.com/pinball/forum/to...1#post-3225633-SD- pinballspcom.
The full assembled DMD price is 164 euros, with several optional extras; WIFI + 4 euros, Serial Port + 4 euros, CR2032 battery holder + secondary oscillator for first animated clocks and remote Source + 3 euros, A dual-release connector (topper) 2 euros.
Delivery worldwide by courier.
Contact email pinballsp@gmail.com, pinballsp Skype, e https://www.facebook.com/Pinballsp Facebook, WhatsApp +34 693 344 445.
Kind Regards.
.
Last edited: