Found it! DMD Glare guard

[David King]

Where can I get glare guards from?
Standard size. Metal or plastic. Required 2
Pm me.
Thanks

David

 

[Marvello]

I had 2 metal ones but wouldn't recommend metal. It didn't feel right sliding them under the glass channel, even with tape on to stop them scratching the glass.

I think I binned them as I knew I'd never want to use them again.

 

[David_Vi]

I think I binned them as I knew I'd never want to use them again.

I've got three of those and only got them via a member here, never had an issue with the glass scratching, the glare protectors have some black electrical tape over the glass end.

They're quite sought after! I'd have taken them

 

[Marvello]

Where can I get glare guards from?
Standard size. Metal or plastic. Required 2
Pm me.
Thanks

David

Just checked my old messages and I bought them from you in 2017

 

[Marvello]

They're quite sought after! I'd have taken them

Oops, I did put them in the recycling bin if that helps.

 

[broomstick]

I think I've got a few of the plastic ones, will have a look for you.

 

[Fantazia2]

Someone else asked me this recently and I didnt know at the time, then I saw them on one of the sellers sites linked from this forum, but ive forgotten with company it was now, I think it was the one selling the multiball balls.

Actually it was this one. https://retroarcadespecialists.co.uk/all-products/ols/products/bent-plastic

Widebody version https://retroarcadespecialists.co.uk/all-products/ols/products/wide-body-bent-plastic

 

[David retro]

We have both wide body and standard ones belive the links already above

 

[Fubar]

You can also get laptop screen privacy guards, they work quite well. Put one in my old ACDC.

https://www.3m.co.uk/3M/en_GB/p/d/v000076972/

 

[David retro]

We also have this one on available on back order

DMD No Glare Film For Stern Pinball Machines - Outer Mounting

DMD No Glare Film For Stern Pinball Machines - Outer Mounting No glare polarized DMD film for Stern (and some Sega) machines. Removes DMD glare/reflection in a very stealth way; almost invisible! This film lies flat on your screen, no curling! This film mounts on the OUTSIDE of your DMD display...

retroarcadespecialists.co.uk

 

[David_Vi]

We have both wide body and standard ones belive the links already above

Omg David to the rescue again!

 

[Gonzo]

I think I have one which was rescued from Neil's skip.

I'm bringing the box to Pinfest but can't check at the moment because it's buried

 

[replicas]

@Sgt GrizZ has a cheap alternative for these, I'll let him jump in and let you know.

 

[Marvello]

I've just remembered another reason why I don't like the metal ones, when you slide the glass out you forget to remove the glare guard first and is smashes down onto your playfield.

 

[David_Vi]

I've just remembered another reason why I don't like the metals ones, when you slide the glass out you forget to remove the glare guard first and is smashes down onto your playfield.

That's true, I still do that. Luckily Red and Ted are wearing protection.

 

[David King]

Just checked my old messages and I bought them from you in 2017

Yeah I had some. Gave them away with a machine..now need 2 !! Cheers

 

[David King]

I think I've got a few of the plastic ones, will have a look for you.

Hi. Did you manage to have a look for plastic glare guards?
Thanks.

 

[broomstick]

Yes I've got a couple are you at pinfest

 

[David King]

I can be. How much?!
Thanks.

David

 

[1stoppinball]

Plastic GG are not great metal is best I did have loads but most sold now , got about 5 Wide body ones but will need 2 " cutting off . You do have to be careful when you take glass out thats for sure