The Good: Complete, starts with no errors and plays OK, makes all the shots etc, cheap widebody DMD machine, remote battery holder fitted (I know.......... that's the deal breaker right there)
The Bad: small bit of insert wear (see fortress multiball edge), could do with a workshop and some TLC (odd lamp etc etc etc), deep clean etc, legs are taller than std (could be a good thing for someone), plastic at top near backboard needs repairing again (common break as balls drop here if not careful when you lift the pf) RHS backbox decal scuffed, scratches on glass, usual players routed machine, far right line out on DMD but obviously rarely noticeable due to location, DMD is nice and bright, slingshot plastic chipped, all in all the usual routed condition
The Ugly, MDF in base of cab has swollen and needs replacing (pretty straight forward once you have cut the replacement panel), MDF in rear of backbox is swollen but is solid. (previous seller forgot to mention all the above because he was a c*nt and refused to respond when quizzed) don’t know how the swelling happened as the rest of the machine is not corroded as you would expect and just resembles your average shed stored machine (rusty transformer etc).
Good starter pin, don’t know that much about it, viewing recommended, some mods fitted, eyeball lane mod light interactive, rear gantry light blue (both parts), LHS handle seems to have not suffered the usual wear (happy days), only selling as I need the space due to incoming and the DM is better than money in the bank
Machine has had a replacement used video board and trough board fitted to get it functional and I have spent a bit of time on it doing minor repairs (GI molex also swapped).
The Bad: small bit of insert wear (see fortress multiball edge), could do with a workshop and some TLC (odd lamp etc etc etc), deep clean etc, legs are taller than std (could be a good thing for someone), plastic at top near backboard needs repairing again (common break as balls drop here if not careful when you lift the pf) RHS backbox decal scuffed, scratches on glass, usual players routed machine, far right line out on DMD but obviously rarely noticeable due to location, DMD is nice and bright, slingshot plastic chipped, all in all the usual routed condition
The Ugly, MDF in base of cab has swollen and needs replacing (pretty straight forward once you have cut the replacement panel), MDF in rear of backbox is swollen but is solid. (previous seller forgot to mention all the above because he was a c*nt and refused to respond when quizzed) don’t know how the swelling happened as the rest of the machine is not corroded as you would expect and just resembles your average shed stored machine (rusty transformer etc).
Good starter pin, don’t know that much about it, viewing recommended, some mods fitted, eyeball lane mod light interactive, rear gantry light blue (both parts), LHS handle seems to have not suffered the usual wear (happy days), only selling as I need the space due to incoming and the DM is better than money in the bank
Machine has had a replacement used video board and trough board fitted to get it functional and I have spent a bit of time on it doing minor repairs (GI molex also swapped).
Last edited: