dead U3 audio ROM

[newdos]

Hi Guys,

I a m getting 3 audio beeps on power up, on my demo man, which indicates a dead U3 audio board ROM. How do I go about getting a new ROM programmed ?

Cheers in advacne

Kev

 

[Paul]

PM with address please Mr Kev......

 

[replicas]

Paul's ya man.

 

[newdos]

Paul's ya man.

He sure is Daz and he is onto it straight away. What a gent.

I bough a cheap demo man and if you thought the WH20 was bad this is unbelievable - water damaged, so cab and head are shot and everything is rusty!!! Amazingly though the boards are all mint and it boots up fine apart from the audio error!!!

I love a challenge me !!

Cheers Kev

 

[Pudsey pinball]

I revived a demo man at Xmas that was a v v badly water damaged, make sure you take a good look at the elevator and claw motors n gear boxes before running them as they sieze!

 

[replicas]

I revived a demo man at Xmas that was a v v badly water damaged, make sure you take a good look at the elevator and claw motors n gear boxes before running them as they sieze!

They sound like twins Dave.
Remember that one and it's a credit to you that you spent the time on it to save it and keep another pinball going for plenty other people to enjoy.
Sounds like Kev is following in your footsteps and rescuing another so plenty others can enjoy a pinball machine brought back from the dead.
Good on you Kev saving any machine when it's easier to break up is a credit to you.

 

[newdos]

They sound like twins Dave.
Remember that one and it's a credit to you that you spent the time on it to save it and keep another pinball going for plenty other people to enjoy.
Sounds like Kev is following in your footsteps and rescuing another so plenty others can enjoy a pinball machine brought back from the dead.
Good on you Kev saving any machine when it's easier to break up is a credit to you.

Cheers guys and it's only with the help of all you guys on here

 

[newdos]

I revived a demo man at Xmas that was a v v badly water damaged, make sure you take a good look at the elevator and claw motors n gear boxes before running them as they sieze!

Will do Dave thanks for the tip