My DE Star Wars has an intermittent issue. About 30% of the time I play it. The DMD is less bright and flickers. Sometime so dull you can’t read it. Also it continuously says ‘May the Force be with you in game play. I checked the PS and got these readings
+5v = 4.99v
+12v = 9.8v
-12v = -13.0v
Readings for the HV output, left to tight are. -106v -114v 65v
The most suspicious one I think is the 9.8v on the 12v output
What are your thoughts on this?
Could a low 12v supply cause the fault?
Is it possible to adjust/fix the PS? I don’t see any obvious adjustments.
Could someone share the voltage readings from their DE PS with me?
Final point is it’s running LEDs. Could this have an impact?
Thanks
Steve
+5v = 4.99v
+12v = 9.8v
-12v = -13.0v
Readings for the HV output, left to tight are. -106v -114v 65v
The most suspicious one I think is the 9.8v on the 12v output
What are your thoughts on this?
Could a low 12v supply cause the fault?
Is it possible to adjust/fix the PS? I don’t see any obvious adjustments.
Could someone share the voltage readings from their DE PS with me?
Final point is it’s running LEDs. Could this have an impact?
Thanks
Steve