Just shopped my Robocop and now and again the flipper/s will go weak, more so when you flip with the end of the flipper. I have also seen both flippers go weak/short flip at same time.
Both flippers have had rebuild kits fitted.
Have checked flipper board connections/pins etc.
New cabinet switches adjusted close.
Checked fuses.
I am wondering is it possible it could be anything to do with the relay on the mpu board?
Any help much appreciated as this is my first Data East.
Will probably order some new coils as on one the wire looks loosely wound.
Both flippers have had rebuild kits fitted.
Have checked flipper board connections/pins etc.
New cabinet switches adjusted close.
Checked fuses.
I am wondering is it possible it could be anything to do with the relay on the mpu board?
Any help much appreciated as this is my first Data East.
Will probably order some new coils as on one the wire looks loosely wound.
Last edited: