Data East Batman light board help

[Jagspete]

I've a small light board from the back of the playfield that came to me with solder coated wires fitting into the molex connector, can anyone send me a photo of theirs, it's back edge of the playfield, 520-5036-04, it looks like the connector

should be fitted to the brown side, but will this interfere with re- installing? ( It's not my machine so can't check)

 

[Paul]

I dont have one, however connector should be fitted to the "brown side" - Would be worth making sure that the pins protrude through enough to make a good contact on the solder side - if they dont you should be able to push them through the connector a little....

 

[Jagspete]

Thanks @Paul done now. Issue was the brown side fixed to the back of playfield so there was no clearance or cutouts for a connector to be, resolved it by fitting backwards with the long pins going thru the board from the brown side.