Don't trust the instruction manual for the orientation of the plugs!
Specifically the ribbon from the CPU board to the 8-driver PCB
I just plugged it in as per the drawings in the manual, double checked, tripple checked and then when I turned the machine on
*BANG*
As every coil and flasher fired at the same time, followed shortly by the flashing of fuses as they popped one by one before I could turn the power back off
The F*cking manual is wrong
Great, more things to fix
Specifically the ribbon from the CPU board to the 8-driver PCB
I just plugged it in as per the drawings in the manual, double checked, tripple checked and then when I turned the machine on
*BANG*
As every coil and flasher fired at the same time, followed shortly by the flashing of fuses as they popped one by one before I could turn the power back off
The F*cking manual is wrong

Great, more things to fix
