OP
OP
MattCarr
Site Supporter
Current state of the project. Still building out the playfield, doing all the wiring etc.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
In Progress Cyber Race homebrew. From virtual to physical (build log)
- Thread starter MattCarr
- Start date
Current state of the project. Still building out the playfield, doing all the wiring etc.
OP
OP
MattCarr
Site Supporter
OP
OP
MattCarr
Site Supporter
Working on the right ramp, it has a diverter which will open when the ball locks are qualified, balls will go into a vuk and be staged on a bridge above the ramp.
View attachment IMG_1606.mov
Next I have to rework the center VUK. It was rejecting too much and felt really unfair. I replaced the pop behind it with a slingshot, which gave me enough space to make it deeper. It has plenty of time to settle now and doesn’t reject. The vuk will kick the ball up into a helix ramp that feeds the upper flipper.
View attachment E2169CFB-D8FA-4C1F-B6D8-673B2A46C2CE.mov
View attachment IMG_1606.mov
Next I have to rework the center VUK. It was rejecting too much and felt really unfair. I replaced the pop behind it with a slingshot, which gave me enough space to make it deeper. It has plenty of time to settle now and doesn’t reject. The vuk will kick the ball up into a helix ramp that feeds the upper flipper.
View attachment E2169CFB-D8FA-4C1F-B6D8-673B2A46C2CE.mov