Creech bowl & centre ramp LEDs problem

[Jon Fletcher]

Can anybody shed any light on this? The tiny green LEDs around the centre ramp and bowl have stopped working. Has anyone else encountered this problem before? Not sure which connection these are fed from, thanks

 

[windoesnot]

Might be completely wrong here but there is the chase light board on Creech, that would be the first place I would look

 

[Jon Fletcher]

Ok mate thanks for the tip that's a start. Dumb Q, but where's that board? Jon

 

[windoesnot]

I dunno, not seen under one since you bought if off me

I'd guess its either under the playfield directly or on the side of the cabinet somewhere. Looks like this:



Jedi Master @replicas may be able to help with this one

 

[Jon Fletcher]

Thanks dude, think it's below playfield. Will take a look!

 

[windoesnot]

If you dont have the manuel its on ipdb with the wiring schematic (please dont take that as me sounding like I have any sort of clue though)

 

[pinballtoys]

hello
with the pinball powered-on you could take a peek at this board. If the red LED is on that means you've got 5V &12V present. If you have a meter you could check for ac voltage between GI1 & RT1 and between GI2 & RT2 on JI connector.
hope that helps...