congo 12v supply - pin2dmd

[cr5000462]

Hi,

Can anyone offer some guidance, which cables would I be tapping into on Congo for a 12v supply to power a pin2dmd?

 

[Banzaipinabll]

Congo is wpc-95. this page shows you where to connect, scroll to the power supply. https://pin2dmd.com/hardware/

 

[cr5000462]

Brilliant thanks
So as j138 is free on Congo
I can use a idc connector and put 12v on pin 3 and gnd on pin2 (right to left)?

Thank you