What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Pending.. Compact outbuilding project . House 3 pins 2.6k

Kram2

Registered
Joined
May 24, 2015
Messages
143
Location
Preston
Thought I’d offer this on here . Nice little screw back together compact pin shed with everything you need

Standalone secure outbuilding . I custom ordered this in summer 2017. It was built to house 3 pins so room to slide glass off . I’m just about to start dismantling it so can be seen before I start if need be. It’s steel framed , insulated , boarded and finished with laminate. Double glazed with window bars and a drug dealer spec secure door. It has a consumer unit with cabinet and would include all cable trays lighting and wiring. Basically a nice screw back together project. It’s free standing so doesn’t need a base just rest it off the ground . supplied from a company called life long steel sheds .

it’s been heated / dehumidified since I built it. pins always fared well in it

some of the photos are old to show it’s original assembly to show the construction. It’s current status is fully assembled



it’s base is 3.1 x 3.1 . Max Apex height 2.5 m. Lowest height 1.9 m

so from a transport point of view the largest single section would be 3.1 m by 2.5m ( apex height )
everything else will be smaller

I’m based in Preston. Please note the steel frame only breaks down so far. See the photo of the low loader truck for an idea of how it will be need to be transported

I literally spent thousands on this . selling as I’m moving house and renting this place . it’s built over a drain So Wouldn’t fancy the prospect dismantling to fix a collapsed drain with tenants in situ

just to clarify the two photos that show the frame are not this shed. They are my previous one to show the construction. i bought a bigger one ( this listing )from the same company to house an additional pin
 

Attachments

  • A1DEE8D3-22E8-4F62-9292-BC0060BEAC2B.jpeg
    A1DEE8D3-22E8-4F62-9292-BC0060BEAC2B.jpeg
    163.8 KB · Views: 127
  • 0E828DA7-44B4-4B65-9960-1AFFD0758C56.png
    0E828DA7-44B4-4B65-9960-1AFFD0758C56.png
    184.5 KB · Views: 129
  • EF52558B-F749-44E1-8D9D-3E8F992F13CD.png
    EF52558B-F749-44E1-8D9D-3E8F992F13CD.png
    203.8 KB · Views: 120
  • E6B08985-FF32-4E6C-AA62-DF88BA7482ED.png
    E6B08985-FF32-4E6C-AA62-DF88BA7482ED.png
    157.5 KB · Views: 112
  • 3C6073A4-B478-4904-AE4B-66982E732989.png
    3C6073A4-B478-4904-AE4B-66982E732989.png
    197.5 KB · Views: 109
  • EAD2849D-FF17-4481-A096-9E2E6287F4EC.jpeg
    EAD2849D-FF17-4481-A096-9E2E6287F4EC.jpeg
    75.7 KB · Views: 111
  • 6DF27C5E-1E4E-4AD1-9D08-56788AFA7CE4.jpeg
    6DF27C5E-1E4E-4AD1-9D08-56788AFA7CE4.jpeg
    85.4 KB · Views: 113
  • 67A80E2E-E7B8-4B1F-A15E-3B4992239684.jpeg
    67A80E2E-E7B8-4B1F-A15E-3B4992239684.jpeg
    95.1 KB · Views: 115
  • 57261341-E72C-4715-B5BE-1C8F11C5BC2E.jpeg
    57261341-E72C-4715-B5BE-1C8F11C5BC2E.jpeg
    111.5 KB · Views: 121
  • F4A8EEA1-1EB6-4A63-AB92-1FA5F8759574.png
    F4A8EEA1-1EB6-4A63-AB92-1FA5F8759574.png
    150.8 KB · Views: 115
  • 474C8D9C-5D26-4C91-AD36-A7EB11F448D6.png
    474C8D9C-5D26-4C91-AD36-A7EB11F448D6.png
    324.5 KB · Views: 107
  • 64442A5F-7FA4-451B-8509-98DB3E30E86F.png
    64442A5F-7FA4-451B-8509-98DB3E30E86F.png
    365.2 KB · Views: 76
  • 79F13664-BAC1-417E-897A-D8BFAF91CA36.png
    79F13664-BAC1-417E-897A-D8BFAF91CA36.png
    444.7 KB · Views: 30
Last edited:
2.5m height makes it just within the permitted development range I undrstand

I think that only applies if it's close to the border of your land, if its further from the border, 2m I think, you can have upto 4.5m height.

It has been a while since I looked at the rules though.
 
if within 2m of a boundary you can only go up to 2.5m high at the top of the apex.
 
Back
Top Bottom