For Sale Col’s Pinball Mods , General Store & Hired Help.

[bartron]

The Shadow

 

[bartron]

I went with blue as it matches the inlanes and slingshots the best.
Stan

 

[huggers]

Legend Col, Merry Christmas mate

 

[biglouieuk]

I'll send you Bride of Pinbot when they are on Col. Merry Christmas!

Rob

 

[Colywobbles]

Not a lot of new stuff done over xmas and the wife deciding to add a glass of her finest wine to the insides of my laptop halted play but replacement now in da house.
I still managed to help out on a few of the members projects over the festivitys and have finally managed to catch up on a few jobs this WE so hopefully all back to normal next week.
a few notable additions to the library were shooter plates for WOZ and Metallica and now I have TSPP in the lineup I will be adding to that set of protectors once I’ve had a good look round it.

Woz & Metallica shooter plates @ £10 each


a couple of the many custom jobs I managed to get done



thx for looking and just shout if you have an idea I can help with

Col

 

[huggers]

What plastic protector colours do well on Jurassic Park? Thinking about getting some perhaps. I'm guessing orange or maybe green?

 

[Colywobbles]

Done a few sets in green defo hits the spot on JP

Col

 

[Banzaipinabll]

@Colywobbles , was looking to get some protectors for a couple of my pins, can i order here or it is just through pinball bazaar?, thanks

 

[James]

Order direct from @Colywobbles if you’re just ordering protectors as it’ll be cheaper

 

[Gonzo]

Col is a wizard

 

[huggers]

Col is a wizard

View attachment 134209

Oooooooh I might have to get some of these, very snazzy

 

[Colywobbles]

MM clear set to replace all those old cracked and Smokey ones.

£25 inc P&P

 

[Colywobbles]

Sega StarWars full clear set. Get rid of the bent and Smokey ones and and give your pin a fresh new look.
This one is a biggie with 13 pieces some of which are almost half a meter long!

£75 posted

 

[Colywobbles]

Finally got around to making some WPC & WPC-95 Flipper Button Protectors.
I fitted these to a couple of my mates pins and although a little late to the party should stop any further wear.
I now have these done for most pins inc the above as well as JJP and most Stern’s bar the obvious Lollypop armour and Custom LE’s

£12.50 per set which includes P&P

 

[BoneDawg]

Finally got around to making some WPC & WPC-95 Flipper Button Protectors.
I fitted these to a couple of my mates pins and although a little late to the party should stop any further wear.
I now have these done for most pins inc the above as well as JJP and most Stern’s bar the obvious Lollypop armour and Custom LE’s

£12.50 per set which includes P&P

View attachment 138307

View attachment 138308

View attachment 138309

Are you still making the flipper button protectors? I'd like a pair if so. Thanks

 

[Colywobbles]

Yh just pm me to arrange

 

[Marvello]

I wasn't sure where to post this but here is probably the best place. I fitted the sling and lane guide protectors which meant the original screws weren't long enough for the lane guides. The damned imperial system needs consigning to the past as it caused no end of confusion trying to figure out the correct size!

The original screws were approx 4.5cm and I bought replacement 5cm (2") ones.

Machine Screw 2" x #6-32 p-ph 237-5513-00 4006-01005-32 QM - You can get them here:

Machine Screw 2" x #6-32 p-ph 237-5513-00 4006-01005-32 QM

Machine Screw 2" x 6-32" p-ph 237-5513-00 4006-01005-32

pinparts.co.uk

I didn't have to buy replacement ones for my Turtles, but did for Stranger Things which oddly had 1 screw that was 5cm, the other 3 were 4.5cm.

 

[replicas]

Jim @myPinballs can sort you out with longer lane guide pan headed machine screws.

 

[Colywobbles]

Some Starwars love in the form of coindoor plaques for both Mando and SW

I’ve used the SW Aurabesh font to do these so the bottom one says:
“May the force be with you”

And the top:
“This is the Way”

Both look super cool in the flesh and compliment the pin beautifully

 

[ronsplooter]

Col @Colywobbles any chance of a coin door plate for TMNT?

 

[Colywobbles]

I know how you feel and need to do mine TBH but I was asked to do these!
However my stuff continually sitts at the bottom of my todo list.

 

[ronsplooter]

Well I'll definitely have one when you get round to it mate

 

[BoneDawg]

Yh just pm me to arrange

Did you get my pm bud?

 

[Colywobbles]

Did you get my pm bud?

I did and replied but some reason never went through. I’ve replied again to ask
What pin are they for.

 

[Colywobbles]

IMDN shooter love in brushed gold.
Great idea by @Tyke

 

[cmrl9]

Hi Colywobbles,

I picked up a lord of the rings shooter plate from bazaar which looks great. I think it might have been something you made

I'm after a engraved Ball guard from Marco Pinball, however I've been waiting two months now, it did come in stock for 2 hours but I missed it.

I wondered if its something you or someone else from the site could make?

Marco Specialties Pinball Parts

LORD OF THE RINGS (Stern) Ball guard engraved

www.marcospecialties.com

Happy to pay a sensible price

 

[Colywobbles]

Hi Colywobbles,

I picked up a lord of the rings shooter plate from bazaar which looks great. I think it might have been something you made

I'm after a engraved Ball guard from Marco Pinball, however I've been waiting two months now, it did come in stock for 2 hours but I missed it.

I wondered if its something you or someone else from the site could make?

Marco Specialties Pinball Parts

LORD OF THE RINGS (Stern) Ball guard engraved

www.marcospecialties.com

View attachment 148265View attachment 148270

Happy to pay a sensible price

I’ve done that protector in standard 2mm acrylic but could etch it if you needed but bear in mind it will be 3mm so check it will fit there.
In the meantime I came up with this

 

[cmrl9]

I’ve done that protector in standard 2mm acrylic but could etch it if you needed but bear in mind it will be 3mm so check it will fit there.
In the meantime I came up with this

View attachment 148616View attachment 148617

Thanks, checked the machine I'm pretty sure 3mm will be fine. Could you do one for me please?

The plates look great, do you think it would be possible to do the bottom one for me except with "one ring edition" as the wording rather than "limited Edition" think it would look great with the custom ring shooter rod I have

Thanks

 

[cmrl9]

Thanks, checked the machine I'm pretty sure 3mm will be fine. Could you do one for me please?

The plates look great, do you think it would be possible to do the bottom one for me except with "one ring edition" as the wording rather than "limited Edition" think it would look great with the custom ring shooter rod I have

Thanks

Thanks, checked the machine I'm pretty sure 3mm will be fine. Could you do one for me please?

The plates look great, do you think it would be possible to do the bottom one for me except with "one ring edition" as the wording rather than "limited Edition" think it would look great with the custom ring shooter rod I have

Thanks

Mean't to say happy to take the limited edtion or the other plate as well if yur stuck with one, as I understand they o cost something to make

 

[Colywobbles]

No it’s fine I’ll do one with One Ring Edition in Half Elvish font if you like.