Cirqus Voltaire - A few issues!

[Andypuk]

Hi All,

I wondered if anyone could help.....playing my CV today and the Ringmaster had a Position Switch problem. This seemed to clear itself, but now the Boom Balloon will not go back down and the auto-kicker will not fire when you have a ball save. The Ringmaster also doesn't always go back to the correct position either.

All was working fine when I played it last

I have gone to the Solenoid Test but nothing happens in the Jet Up/Down for the Boom Balloon. In the Tests menu The Ringmaster does move up and down fine though, but again the Jet Up/Down doesn't do anything.

I've had the table up but is there a manual way of releasing the Boom Balloon so that it can do back down in the playfield?

Not sure where to start with this one.....

Andy

 

[Pudsey pinball]

Poss cable. Off?

 

[Andypuk]

Have checked under playfield but nothing that I can see. I can take a photo if it might be helpful to see.

 

[Pudsey pinball]

Hmm not sure ,have you checked all fuses,ribbon cables,check that all cables are on

 

[Andypuk]

Ahhhhhhh - looking closely at the fuses again - looks like its blown....do I replace like for like? - looking in the manual its a T4.0A, 250V fuse p/n 5731-14530-00

 

[Pudsey pinball]

Yep like for like

 

[Andypuk]

A case of me fretting too quickly....spoilt my Sunday after pinball session Hopefully this will be the cause of the problems - just got to order some in tho as no spare ones.