Cirqus Voltaire for sale £4,500
Purchased from Chris B last October, it’s been owned and enjoyed by the family for the last 5 months and it’s now time to make way for the next pinball (unfortunately one in one out). Link to original add: http://www.pinballinfo.com/community/threads/cv.40890/#post-273470
Since October it’s had:
Broken plastics and faulty switches replaced
Re-rubbered
New balls
Cabinet leg protectors
Loads of photos are on the Flickr link: https://www.flickr.com/photos/152800674@N03/albums/72157703803991682/with/40303540403/
Purchased from Chris B last October, it’s been owned and enjoyed by the family for the last 5 months and it’s now time to make way for the next pinball (unfortunately one in one out). Link to original add: http://www.pinballinfo.com/community/threads/cv.40890/#post-273470
Since October it’s had:
Broken plastics and faulty switches replaced
Re-rubbered
New balls
Cabinet leg protectors
Loads of photos are on the Flickr link: https://www.flickr.com/photos/152800674@N03/albums/72157703803991682/with/40303540403/
- Back box has some dinks that have been touched in (see photos)
- Main cabinet is good overall, but there is a little bit of wrinkling around the back legs, not that noticeable with cabinet leg protectors on (see photos) and on the right hand flipper side a small amount of wear that has been touched in (see photos)
- Playfield is good, with the usual wear on one of the volt decals (see photos)
- The DMD is a little gassed out in top left and bottom right, it’s not really noticeable during the game, but worth mentioning and a good excuse for the next owner to fit a colour DMD if they wanted, but it never bothered me.
- Whilst all the broken plastics have been replaced I couldn’t get hold of a replacement back glass lift channel, but the back glass still lifts out easily.
- No faults or errors, plays just as it should.
