- Joined
- Jul 21, 2011
- Messages
- 3,432
- Alias
- .
As I've a few days off for Christmas thought I'd put together the RasPiSound I bought from the German forums.
Basically it's like a pinsound but a third if not less of the price, running on a Pi0 or Pi3 with a shield.
Frankenstein will be the guinea pig.
Let's start off with the basic board:
![20181224_131550.jpg 20181224_131550.jpg](https://www.pinballinfo.com/community/data/attachments/76/76672-bd84f94b2027a3fba9abc0675da4a159.jpg)
Resistors added:
![20181224_132315.jpg 20181224_132315.jpg](https://www.pinballinfo.com/community/data/attachments/76/76673-fa46b6cf30d19002e7cae34f78698cd9.jpg)
Header pins added:
![20181224_134033.jpg 20181224_134033.jpg](https://www.pinballinfo.com/community/data/attachments/76/76674-e4ae41831977fb25b65cb02c8faebb47.jpg)
Chips added:
![20181224_140420.jpg 20181224_140420.jpg](https://www.pinballinfo.com/community/data/attachments/76/76675-d2b5a12601ca62e33b3f2257564b91a2.jpg)
12v and other connector added:
![20181224_140752.jpg 20181224_140752.jpg](https://www.pinballinfo.com/community/data/attachments/76/76676-4e8816f351d287086b5c915bf0abd8ab.jpg)
Amps and connector added:
![20181224_144633.jpg 20181224_144633.jpg](https://www.pinballinfo.com/community/data/attachments/76/76677-6c7d909f86da4c73418771f8dd8fb440.jpg)
Will pick up were I left off after the festivities.
Basically it's like a pinsound but a third if not less of the price, running on a Pi0 or Pi3 with a shield.
Frankenstein will be the guinea pig.
Let's start off with the basic board:
![20181224_131550.jpg 20181224_131550.jpg](https://www.pinballinfo.com/community/data/attachments/76/76672-bd84f94b2027a3fba9abc0675da4a159.jpg)
Resistors added:
![20181224_132315.jpg 20181224_132315.jpg](https://www.pinballinfo.com/community/data/attachments/76/76673-fa46b6cf30d19002e7cae34f78698cd9.jpg)
Header pins added:
![20181224_134033.jpg 20181224_134033.jpg](https://www.pinballinfo.com/community/data/attachments/76/76674-e4ae41831977fb25b65cb02c8faebb47.jpg)
Chips added:
![20181224_140420.jpg 20181224_140420.jpg](https://www.pinballinfo.com/community/data/attachments/76/76675-d2b5a12601ca62e33b3f2257564b91a2.jpg)
12v and other connector added:
![20181224_140752.jpg 20181224_140752.jpg](https://www.pinballinfo.com/community/data/attachments/76/76676-4e8816f351d287086b5c915bf0abd8ab.jpg)
Amps and connector added:
![20181224_144633.jpg 20181224_144633.jpg](https://www.pinballinfo.com/community/data/attachments/76/76677-6c7d909f86da4c73418771f8dd8fb440.jpg)
Will pick up were I left off after the festivities.
Last edited: