Hey guys,
Just wanted some advice on something and an error I get when turning on my BSD which has been happening for maybe a month or so now. I get "Check left flipper EOS" and also "Check right flipper EOS" as errors when the game boots up. I have had a look at the leaf switches, no broken wires or anything amiss but a bit of googling seems to suggest this is an adjustment error causing the issue. I've tried having a fiddle with the leafs and looking at the mechanisms and they appear to be working as they should so I'm a little stuck as to why I am getting this error. Both flippers work as they always have so I'm a bit lost! Any advice would be greatly appreciated. The only other insight I can give is that these errors both showed up at the same time and it was before I did any work on the game (recently re-rubbered, cleaned and put new posts and LED's in).
The other issue is people say "compare one to the other, it is probably slightly differently set" but this seems to be if you are getting the issue with 1 flipper, unfortunately I am getting it with both
Just wanted some advice on something and an error I get when turning on my BSD which has been happening for maybe a month or so now. I get "Check left flipper EOS" and also "Check right flipper EOS" as errors when the game boots up. I have had a look at the leaf switches, no broken wires or anything amiss but a bit of googling seems to suggest this is an adjustment error causing the issue. I've tried having a fiddle with the leafs and looking at the mechanisms and they appear to be working as they should so I'm a little stuck as to why I am getting this error. Both flippers work as they always have so I'm a bit lost! Any advice would be greatly appreciated. The only other insight I can give is that these errors both showed up at the same time and it was before I did any work on the game (recently re-rubbered, cleaned and put new posts and LED's in).
The other issue is people say "compare one to the other, it is probably slightly differently set" but this seems to be if you are getting the issue with 1 flipper, unfortunately I am getting it with both
