CFTBL shooter guage

[windoesnot]

Ok, so this thing has worked its way loose tonight:



Have looked through the Manuel and cant find what its called. Basically there was only 1 of the 2 screws holding it into the playfield and the screw hole size are a fair bit bigger than they would have been when first drilled in both this bracket thing and also the playfield. Aside from simply fitting fatter screws, any other suggestions?

Had to take the bowl ramp off to get the apron out to be able to get to the two screw holes. Have put it back together for now.

Thanks

 

[replicas]

You can either plug the hole with wood (cocktail sticks or plastic) this will give a tight fit on the screws and hopefully solve your problem.
Next time I see you I will sort you out some screws, bolts, washers and the like so you have a few spares.

 

[Carl Spiby]

Fill the hole with matchsticks then screw it back in.

 

[windoesnot]

Ok sorted (for now), match sticks and original screw for the top hole, don't have a screw short or wide enough for the second so have used the age old solution of cable ties fixing everything.

Thanks for the suggestions

 

[carl lawrence]

It is always good practice to add some P V A glue to the wooded stick and then push in the hole!