What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

BSD speaker panel / mist gates

russdx1

russdx1

Site Supporter
5Years
Joined
Jul 7, 2018
Messages
3,524
Location
Bristol
Any one got a speaker panel in good condition for sale? Before I order one from Europe hehe.
And the little gates used for mist multiball?

Regards
Russell
 
The xianek speaker panel I bought (€68 posted) is top class, if you have stock plasma DMD it may be worth getting that and adding a red filter then if you upgrade to LED display you can remove the filter, just a thought.
 
You could have my old panel for the cost of postage, however I adapted it to a clear window and doubtful it meets your good condition request, if you want photos later just let me know.
 
Oh xianek does one? Will grab one of those! Yeah had standard DMD

Also after some missing plastics, basically the ones under the coffin that go over the right pop and tiny little one next to the pop
 
crsedgar said:
You could have my old panel for the cost of postage, however I adapted it to a clear window and doubtful it meets your good condition request, if you want photos later just let me know.
Click to expand...
Yeah one in the game i just bought is in good condition apart from the red window was cut out with a knife :( (is this same with yours?) I am after a nice uncut one :)
 
@russdx1 if you find a supplier of the left mist gate I'd be interested as mine is homemade with what looks like copper wire.

There is a template of the wire on Pinside (well i think it was Pinside) I may have a go at fabricating as nicer version some day.

Just to be clear unless Xianek tells you he only does clear window versions.
 
crsedgar said:
@russdx1 if you find a supplier of the left mist gate I'd be interested as mine is homemade with what looks like copper wire.

There is a template of the wire on Pinside (well i think it was Pinside) I may have a go at fabricating as nicer version some day.

Just to be clear unless Xianek tells you he only does clear window versions.
Click to expand...
Ah yes I have same issue, its some strange home made copper wire one, I cant seem to find a original / nice repro :( Also plastics are very hard to track down on this game and I only need 2 of them! :D
Yeah i'll give Xianek a shout, clear is fine :) (long as its a nice transparent window hehe)
 
russdx1 said:
(long as its a nice transparent window hehe)
Click to expand...
It's as clear as you'll ever see on WPC :)

2eb40ec55d0e6f4c770515a3fa46a455.jpg
 
Last edited:
The gates are available on Pinball Centre Have bought stuff from there before and it only takes a few days

I've also got one of Xianek's clear ones - it's very good but is a slightly different blue to the original (by design rather than a fault)
 
Ordered the speaker panel :)

Just need to hunt down a few missing plastics now, will check those gates out :)
 
russdx1 said:
The part numbers don't seem to match up on pinball center or am i looking at wrong part? I am mostly after the lower wire mist gate.
View attachment 123398

which is this one?
https://www.pinball.center/en/shop/pinball-parts/playfield-parts/gates/8093/wire-gate-12-7064
Click to expand...
The part number ref in the manual is for the assembly, not the gate (Assembly is Gate plus the metal bit it attaches to)
That one is the right gate in Assy 16259 (so 12-7064 is a component of 16259 ) and the other one is 12-7065 for the left (lower) gate, a component of Assy A-16257


1603889099885.png
This is A-16259
 
You must log in or register to reply here.
Back
Top Bottom