What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

BOP 2.0 not booting

Yes have done that but nothing. Wondering if the power supply isn’t working.
Is it 12volt ?
 
Could it be the coin battery on the cpu? Seen that being an issue before.
I also have a BOP 2.0 coming my way to borrow with a boot issue so I’m hoping it’s that simple
 
Our one at the club has to be turned on and then the backglass removed and the computer turned on separately every day
 
Can it not be set in the BIOS to auto start at power on, or is it not wired in to the pins power cabling?
It will be able to, but you need to know how... RFM with a new PC in it can have the same problem. Once batteries are replaced it loses the original auto start setting, many require jumping when power cabling isn't installed, then into the bios before it boots to set the auto start.
 
There’s a start up and power down board that runs the pc
Ask Jim @ mypinballs he knows the bop 2.0 really well having done the wiring previously on it
 
Back
Top Bottom