Hi all,
I noticed on Batman 66 the right cat ramp was triggering on its own, I tracked it down to an opto but wasn’t sure as to why.
I noticed the alignment of the opto was out, and adjusted it was okay for a while. But returned, so I have had it out.
The ramp uses tags to hold it together, and there is a lot of slop in the back and forth on it. As demonstrated in the pictures. I was considering loctite on the tags but it isn’t a thread on there is it, so don’t think that will hold.
Does this need welding? We are talking 4mm of sloppiness here.
You can see much this has moved over time due to the opto which I’ve ordered a new one from Phil.
I noticed on Batman 66 the right cat ramp was triggering on its own, I tracked it down to an opto but wasn’t sure as to why.
I noticed the alignment of the opto was out, and adjusted it was okay for a while. But returned, so I have had it out.
The ramp uses tags to hold it together, and there is a lot of slop in the back and forth on it. As demonstrated in the pictures. I was considering loctite on the tags but it isn’t a thread on there is it, so don’t think that will hold.
Does this need welding? We are talking 4mm of sloppiness here.
You can see much this has moved over time due to the opto which I’ve ordered a new one from Phil.