Another One done!
This was a massive job, not one but two, well 1 and a half playfeilds to do.
All inserts were removed and reseated.
Somethings I had to work with / contend with.
And then I had three insert sticker (G, H, T) which were too small, so I had to remake these as well.
Anyway, lots was done.
Sit back and enjoy the before and after photos.
After Photos
This was a massive job, not one but two, well 1 and a half playfeilds to do.
All inserts were removed and reseated.
Somethings I had to work with / contend with.
- Cracked inserts
- Mylar over almost everything, and this mylar was a b#tch to remove, as you will see in some photos of what it did when removed.
- Screen printing lifting off with the mylar
- lots and lots of touch ups
- lots and lots of masking
- lots and lost of clearing, sanding and clearing and sanding etc (not all touchups can be done in one go, this usually normal, but the amounts of times I had to do it on this, arghhhhhhh)
And then I had three insert sticker (G, H, T) which were too small, so I had to remake these as well.
Anyway, lots was done.
Sit back and enjoy the before and after photos.
After Photos
That mylar did not come up easy 
Loving what you did with the hidden area of the lower playfield, did you paint that knight in or is it a decal or something?
